|
Style |
Description/Features |
Min. Shaft Dia. |
Max. Shaft Dia. |
Misalignments & Runout at fpm |
Pressure |
Spring Configuration |
|
Model 151 |
Reinforced rubber OD; ideal for low speed applications; includes a Stainless Steel Garter spring; cover plate required. |
3" |
50" |
-- -- |
-- -- |
-- -- |
|
Model 154 |
Protected Garter spring to avoid dislodging; reverse bevel lip to prevent lip rollover; includes a Stainless Steel Garter spring; reinforced rubber OD; excels in environments where corrosion is typically a problem; cover plate required. |
3" |
50" |
-- -- |
-- -- |
-- -- |
|
Model 154R1 |
Protected Garter spring to avoid dislodging; supplementary dust lip provides greater protection from foreign bodies that can deteriorate the main lip; includes a Stainless Steel Garter spring; reverse bevel lep to prevent lip rollover; reinforced rubber OD; cover plate required. |
3" |
50" |
-- -- |
-- -- |
-- -- |
|
Model 21 |
General purpose split seal. Low-speed service seal; cover plate required. |
3" |
42" |
0.010 @ 500 0.005 @ 1000 |
-- -- |
Molded-in Stainless Steel Finger |
|
Model 23 |
General purpose split seal. Cover plate required; over 300,000 sizes readily available. |
3" |
120" |
0.010 @ 1000 0.005 @ 2000 |
To 7 psi |
Molded-in Stainless Steel Finger |
|
Model 24 |
General purpose split seal for tapered housing grooves. Low-speed service; tapered OD. |
3" |
21.5" |
0.010 @ 500 0.005 @ 1000 |
-- -- |
Molded-in Stainless Steel Finger |
|
Model 25 |
PTFE split seal. Low-speed service; chemical resistance; cover plate required. |
3" |
20" |
0.010 @ 500 0.005 @ 1000 |
-- -- |
Carbon Steel Garter |
|
Model 26 |
General purpose seal; solid or split design. Reverse bevel lip design prevents lip rollover; reinforced rubber OD; single and dual lip configurations available. |
0.750" |
60" |
-- -- |
-- -- |
-- -- |
|
Model 26R1 |
General purpose dual lip seal. Low-speed service; reverse bevel lip design prevents lip rollover. |
0.750" |
60" |
-- -- |
-- -- |
-- -- |
